In dusty workplaces, many workers may notice that the dust will affect the traction of the work boots. Even on clean working surfaces, losing traction in the boots can lead to injuries or even the end of a career. Because of this issue, a high quality work boot should always have a good grip. To know how to improve grip and traction on your work boots, you can refer to these tips of ours.
1. Adding saliva to the sole of the boots can help increase the grip before playing: Although this is not clean, it will temporarily increase traction on your shoes.
2. Washing and cleaning the boots can improve grip effectively: Contaminations are the reason shoes reduce or lose friction. If your boot is full of dust, it will lose its grip.
3. The primary cause of a slippery yard is dust accumulation on the floor: Sweep the basketball court regularly with a dust mop to minimize dirt.
4. Clean the soles after each game and at halftime if possible: The surface of any industrial workplace is susceptible to dirt. It can stick right to the sole of your shoe and reduce traction. Regularly cleaning the soles of your shoes will prevent dirt from accumulating.
5. Replace shoes when soles wear out: Work boots always have a lot of traction. But over time, the stride wears down.
6. Another way to get more grip on basketball shoes is to go out and buy a fresh pair of work shoes: You can find quality shoes at low to high prices at sports stores. New shoes with rubber soles have a much better grip than an old pair.
7. By far, the easiest way to get more grip on a work shoe is to use an adhesive mat: The sticky mat will ensure that you get optimal traction from your shoes.
8. Try lotion or gel: lotion is an adhesive that enhances traction in your boots. Most creams and gels are available directly to your boots by rubbing them on the shoes or by applying them to a towel and then stepping on them.
Table of Contents
- How To Add Traction To Boots
- How To Make Boots Non-Slip
- How To Get More Grip On Your Shoes
- Boot Grip Spray
- How To Fix Slippery Shoes
How To Add Traction To Boots
Have you ever seen basketball players wipe the outsoles of their shoes and wondered why they did that? Everything has its reasons. It is because they wanted to improve the grip of the shoe on the basketball court. And this method is useful for work boots as traction is a vital factor for any boot.
In real life, a good grip will improve your performance on the worksite. If you enter the site with a boot with a weak grip, you cannot perform your techniques well. Or worse, you will get injured because of the slip.
Here is a YouTube video for more instructions.
How To Make Boots Non-Slip
Pieces of flannel, patch, or sandpaper glued to the bottom of the work boot will help reduce slippage. To make the effects last longer, your boots must be washed and dried before work. Pay special attention to the back and nose, on which we glue pieces of felt or glue, placing the strips in different directions. To preserve the look of the boots, we can paint the white sticker with a black marker. This method is simple but only useful for the short term. After up to two days, the strips will fly off.
How To Get More Grip On Your Shoes
The anti-slip shoe sole is not a terrible choice
If your slippery condition occurs because your boots are too old or worn out a lot but not because the soles are too new, use them in the following way. Use support products that are anti-slip stickers to help create a professional grip for your shoes.
The patch has a layer of glue to stick to the sole of the shoe. It is convenient to use, but some people dislike it because the patch often leaves an uncomfortable, sticky layer under the sole when the sticker falls off. Anti-slip stickers are easy to buy both online and at local shops about leather.
Paint puff is a type of paint commonly used in children’s art and apparel. We will use puff paint for this case. When it applies to the sole, it will dry and become a rough layer to create grip for the shoe. You need to create a thin layer under the sole and wait for it to dry. Thanks to this lipstick, your boots will reduce slippage.
One of the home anti-slip methods that people often use is to use hairspray. Apply a thick coat of hairspray to the soles (especially the slippery bottoms of dress shoes) to add more stickiness to the sole. Then, wait at least half a minute. When the hairspray is almost dry and sticky, you can put on your shoes. However, if it rains, the rainwater will wash away the hairspray.
Use adhesive tape
Another simple way to solve the problem of shoes slipping is to stick a few pieces of tape on the soles of the shoes. Stick two pieces of tape in an X-shape on the widest and flattest part of the sole. It will help to maximize the friction of the sole. Remember to replace it with new adhesive regularly because the tape will lose its adhesion after a period of use.
Get professional shoe repair
If your boots are high-grade leather ones, ask the help of a professional shoemaker to reduce the slippery sole of work boots for the best. With the above modification methods, they can cause damage to the shoes. Here, send the shoe to a special shoe repair shop to solve the problem of slipping shoes by replacing the sole.
The worn-out soles of men’s leather boots become slippery, not only hindering and making it difficult to move but also affecting the confident demeanor of men. Therefore, to overcome this situation, the male workers should master the methods to reduce the slippery soles.
Boot Grip Spray
Besides the stickers, you can be faster with a separate spray product for the sole of the boot to create a good grip for the lower part when in contact with the road surface. It helps to reduce unintended slippage.
These products are not yet widely available. They often have the name of traction sprays with quality depending on the line. So, you need to research carefully before deciding to buy. You should ask the seller to provide you with product information.
How To Fix Slippery Shoes
New leather boots, plastic sole boots, or worn-out boots after many years often feel slippery and inconvenient. It is a problem that does not seem too worrisome but brings awful consequences such as dangerous slippery walking, injury, or pain to the foot. If you are having problems with the slippage of your work boots types that are inconvenient to walk, please refer to the three methods below to reduce the slippage of the sole below.
Grinding soles on rough surfaces
When your new boots feel slippery, it may be because the soles of the shoes are too smooth and have not been worn by the impact of walking. The soles when softer or have small concave holes when used a lot often have better grip. Therefore, grinding the soles on rough surfaces will help solve new slippery shoes most efficiently.
How to do it? Wear your shoes on surfaces such as concrete, gravel, stone, or sheet metal with strong gravity you put on your feet and grind the shoes as you walk. If you do not mind, you can take your shoes off and use your hands to grind the soles on these surfaces.
Grind the sole with sandpaper
If you do not want to grind the soles of your boots on those rough surfaces, what will be the most convenient way for you? Use pieces of sandpaper and rub them directly on the sole surface until you feel the soles have friction and roughness.
When doing this step, use coarse grits rather than fine ones for the best results. But this method only works with one and the sole of the boots. The soles are composed of a natural foam and often cannot be applied.
Use a nail file
If you are in a hurry and cannot find the sanding pad, a nail file is a useful tool to help you right now. Using a file is like sandpaper when you use them to sand the surface of the sole. It will come into contact with the ground.
Let the soles wear out naturally
Wearing work boots a lot and walking often is also a way for boots to be worn most naturally to create friction to reduce the slippage of the sole. However, accept some slippery and difficult times to walk affecting your feet.
So, these are the top methods you should use to improve the grip of your work boots, especially for those who are new to the industrial workplace. As we mentioned earlier, work boots that do not have the proper grip can significantly affect your performance and make it difficult to execute most techniques. Poor traction can be a safety hazard for you as it could seriously injure you and keep you off the field. We hope these tips will help you with any work.