For those who love fitness bikes and want to conquer long distances and choose a suitable bike to ride, you should want to know how to inflate bicycle tires. A bike pump is also helpful for you, especially if you can’t find a place to fix it. But, as a result, it is also inconvenient. So it would help if you prepared for yourself a mini bike pump to carry on.
Table of Contents
- A Mini Bike Pump Is Helpful For Trips
- Selecting A Bike Pump Right For Your Bike
- Paying Attention To PSI
- Type Of Schrader Valve
- Type Of Presta Valve
- Using The Type Of Bike Pump That Is Suitable For The Purpose
- How To Pump For Some Specialized Valves
A Mini Bike Pump Is Helpful For Trips
It’s the first time you have a trip, and you must check your bikes tire before you start going. However, anything can happen to your mountain bikes and so on. Just a tiny thorn or a sharp, small ledge can get you in trouble. In particular, nowadays, bicycle repair shops are less and less because they are not popular anymore. Patches or roadblocks are a big problem for your bike and slow you down as planned. With a mini bike pump, you can repair it by yourself and can continue the journey.
However, you need to know that you can’t use the same type of bike pump for every bike. It’s up to the design and van that you have to choose one that suits your bike.
Selecting A Bike Pump Right For Your Bike
When choosing to buy a mountain bike pump, remember that you have to choose the right product, not only for a good one.
Paying Attention To PSI
Do you know about output PSI? When you buy a bike pump, you need to pay attention to it. You can find a Recommended Pressure that has the words xxx PSI ~ xxx bar on the product. If the maximum pressure of the vehicle you choose is too low, no matter how much you pump, it will not inflate the tire.
Therefore, it is the first part that you need to pay attention to when choosing the right one for your bike. Current mountain bikes are usually designed with two common types of valves: Schrader and Presta.
Type Of Schrader Valve
It has the same configuration as a car’s valve, often found on regular sports bikes. This active mode is using a spring to keep the valve closed. Therefore, when using a bicycle with this valve, you need to pay attention. When dirt or sand accidentally falls inside, it will slow down the valve’s operation, making it easy to deflate. This type of valve is used more efficiently than Presta.
Type Of Presta Valve
This type of valve often appears in mountain bikes. It’s more complex because it requires a smaller hole inside the rim of the car. However, it is used with the pressure to close the valve inside, so avoid deflation when dust or sand comes in.
For each type of valve, you must also use a suitable bicycle pump for each kind of bike. Therefore, when buying a pump, you need to make a note to avoid buying the wrong thing and having to go back and forth. Or you can choose a pump that can be used for both types of valves, but you need to choose a reputable unit to own a high-quality product.
Using The Type Of Bike Pump That Is Suitable For The Purpose
Bike Floor Pumps- Handy To Hold And Easy To Use
It is the type that is suitable for home use, which will be very handy. With this pump, you always ensure the tension of tires. It is also convenient and handy to use. You need to put your foot on the machine and use your hand for pumping. This type of pump is used by many people today because of its features. You do not need to use too much energy but can also pump the bike quickly.
The Control Tower bike floor pump, for example, is an excellent choice for you. It is a product of Giant that many bike enthusiasts own.
Portable Pump- Convenient For Long Trips
True to its name, it is a highly compact product and is attractive to backpackers. You also can take it anywhere. It’s difficult for you to find a place that can help you pump your bike on roads, especially when you go far away. A very convenient portable mini bike pump can be put in a backpack and is very useful for long trips.
How To Inflate Bicycle Tires
Owning a minibike pump is very handy; it is essential to ensure your tires are always inflated. It also helps you feel lighter and safer on long trips. No need to worry about any problem that can happen anywhere. Inflating your mountain bike road tires are not rugged, and you need to put the pump in the bike valve. Before pumping, turn the valve slightly. Then slowly lift the pump handle and push it down.
Note that it is necessary to squeeze the mouth of the pump pipe into the bike’s valve to make the pumping go smoothly. When the tire is fully inflated, it will feel more difficult to inflate. You need to check if the wheel is inflated or not. After you feel the tension, slowly pull out the pump’s mouth and close the valve. You need to do this process a bit quickly to avoid pushing the air out of the outer tire.
Steps Of Pumping A Bicycle
Step 1: Before inflating your bike, you need to know the allowable pressure range of your tires. You also should learn how to use a bike pump and how to choose a suitable one for your bike.
Step 2: Next, you need to see if your pump supports the type of valve of your bike or not. Most bicycle bicycles use one of two types of valves: American valves (Schrader) or French valves (Presta), especially some bikes use Dunlop valves. If your pump doesn’t support it, you can find an adapter at your local bike shop.
Step 3: If your valve has a plastic dust cover, remove it before you pump. If your valve is an American (Schrader) valve, you can start pumping immediately after removing the dust cap. If your valve is French (Presta), you need to loosen the valve core lock by turning counter-clockwise. Then, you will know when it is loose enough. Just hearing the steam coming out is enough.
Step 4: Cap the pump head over the valve, press firmly so that the pump head goes all the way down, then push the pump straight up the pump head position. Try shaking the pump head slightly. If you see a lot of shaking, the attachment is not tight. Turn the lever down and do the operation again.
Pumping Steps For A Bike
Step 5: Once the pump head is securely attached, you can start pumping. If you hear a loud and clear gas coming out when pumping, the pump head may not be firmly attached, repeat steps 4.
Step 6: Observing the pressure of the tire while pumping. When you pump to the middle of the allowable pressure range as printed on the side of the case, you can stop. Recording this pressure level, after a few pedaling trips, depending on your body weight, luggage, and the route you travel often, you will feel this pressure level is enough or not. If you feel a shock, you can feel the pressure. You can reduce the pressure a little. If you feel tired pedaling and have to use a lot of force to move, you can increase the pressure a bit.
- Usually, road bikes have pressure levels from 90 to 125 psi
- MTB bikes typically have a pressure rating of 30 to 50 psi.
- Fitness bikes have pressures between 60 and 80 psi.
Remove the pump head by pushing the lever down, then quickly pull the pump head straight up. If you are using a French (Presta) valve, don’t forget to turn the valve back on.
How To Pump For Some Specialized Valves
How To Pump Schrader Valves :
A type of valve with a cylinder surrounded by a threaded valve core, to deflate, it is necessary to use a tool or small object such as the tip of a pen cap to press the valve head. Valve sizes are generally wider and have a shorter diameter than other types of valves. Suitable for sports bikes such as racing valves, fixed gear valves. To open the Schrader valve, remove the rubber cap at the top.
Step 1: You need to know the specified pressure of the tire. It is usually written on the tire surface. Note that the tire pressure level when inflated should not be lower or higher than the specified number. If that is the case, it will damage your tubes and tires.
Step 2: Choose the right pump for the Schrader valve head. You can use a regular pump or a pump machine. For this type of valve, which is commonly used in bicycle tires, finding the right pump shouldn’t be difficult. But also note, small bike pumps or when the pressure is not enough for the tires, you should not use it!
Step 3: Use the pump to push air into the tire. You need to remove the rubber cap on the top of the valve. After pumping, adjust the knob between the valve and the pump head securely by locating them with the lever mounted on the top of the pump nozzle. Inflate the tire until you can see with the naked eye that the tire is inflated enough and not too hard, then pull the lever back and close the gap on the valve head.
How To Pump Presta Valves :
Also known as the French valve, this type of valve is used for racing bikes. It is designed to be longer and narrower than the Schrader valve. In addition, the valve body is protected by a valve lid instead of being surrounded by the valve core.
Step 1: Removing the valve lid will be the first step when you want to pump the car. Slowly loosen the valve assembly, check whether the car valve has steam or the valve body has no air coming out.
Step 2: Find the pressure index (Psi), which is the specified number of your tires. They are marked on the rim.
Step 3: Choose the correct type of car pump; with a specially designed valve like this, you need to use a gas pump or a dedicated pump. Besides, some old bicycle pumps can also fit this valve.
Step 4: Perform a bike pump by removing the valve lid and loosening the copper lid on the valve head. Put the pump nozzle on the valve, turn the lever on the pump nozzle to fix the valve head so that the tire can effectively inflate the tire. After performing this operation, return the lever and cover the valve head to the original position.
Besides, there is also the Woods valve, which is a valve commonly used in Asian countries. Similar in size to the Schrader valve and uses the exact single-valve mechanism as the Presta valve. Therefore, the pumping method is similar to that used for the Presta valve.
In short, when you choose to buy a bicycle pump, you need to pay attention to the factors, information about your bike, and the pump you intend to buy, and choose a product that is suitable for your bike. There are many different bike pumps on the market today, so choosing a reputable unit to buy the product is also an essential factor in choosing a high-quality product.
Here are also about pumping a bike tire and help you to know more about how to use each type of bike pump. If you like our article, please follow us by updating and reading information from us every day.