Many people find it difficult to take off the bike pedals without the use of a pedal wrench. So here is our article on how to take off bike pedals without a pedal wrench.
Table of Contents
- What is Another Tool You Can Use to Take off the Bike Instead of a Pedal Wrench?
- How to Take off Bike Pedals without a Pedal Wrench
- Step 1: Position the Bike Accordingly
- Step 2: Insert the Spanner Where It is to Belong
- Step 3: Rotate the Spanner in the Anti-clockwise Direction
- Step 4: Free the Pedal
- Step 5: Turn the Bicycle around 180 Degrees
- Step 6: Rotate the Crank Arm
- Step 7: Position the Spanner Accordingly
- Step 8: Remove Sneaky Pedal
- For Your Safety
- Why Do I Need to Take off Bike Pedals?
What is Another Tool You Can Use to Take off the Bike Instead of a Pedal Wrench?
One is a pedal wrench, which is a tool used to loosen the bike pedals. If you find it hard to take off the bike pedals without a pedal wrench, you can try another tool like:
1/A Window Breaker
As long as they are window breakers, not a bicycle key or something else that might be a key for a bike.
2/A Flat-bladed Screwdriver
Just like the flat-bladed tool used to open lids of containers. Basically, it’s a type of screwdriver with a straight blade instead of the usual curved blade one finds in the normal screwdriver set. It’s very useful (it can be found in some tools) in some cases when it comes to removing screws that are hard to get at because they are two or three inches away from you or stuck into something really hard like wood, aluminum, etc.
3/ A Guitar Pick
This is something that people use to poke holes in things. That’s why it can be used as a tool for taking off-bike pedals without a pedal wrench.
4/A Pair of Pliers
Needle-nose pliers are the best to use to take off bike pedals without a pedal wrench. It can be used to put on small screws, clips, hooks, etc., but what you want is the kind of pliers you typically use to close electrical plugs or fasten things together with screws or bolts. Let’s say you need to close your bike pedals because your wheels are knocking against something because of loose bike pedals. You can use the pliers to put some force on the pedals so it tightens up so the pedals are no longer loose.
You can use this if you can cut out a big enough circle since it will fit over the pedal wrench head. It may be hard to cut out a circle that’s just slightly bigger than your pedal wrench head, but if you have an inch of space, then that’s perfectly fine.
How to Take off Bike Pedals without a Pedal Wrench
There is a way to remove bike pedals without a pedal wrench. This method doesn’t require any tools and is quite easy to do.
Step 1: Position the Bike Accordingly
Place your bicycle on a flat surface. If you stand alongside the bike, each side of the bike pedal will be a few inches from a wall or a sturdy post. This is to prevent any mishaps that might happen while you are taking off the pedals like accidentally kicking something by accident or losing your balance.
Step 2: Insert the Spanner Where It is to Belong
Carefully place the spanner over the fork, which is part of the pedal alignment, or into that small hole on either side of where your foot should be standing. Carefully place the spanner over the fork, which is part of your pedal alignment, or into that small hole on either side of where your foot should be standing.
Step 3: Rotate the Spanner in the Anti-clockwise Direction
Rotate the spanner in the anti-clockwise direction. This is to release the pedal from its slot. To avoid damaging your bicycle, you should always use your hand to hold onto something for balance. Try not to move suddenly as this might topple you over if you are not careful.
Step 4: Free the Pedal
Very slowly remove the spanner from where it resides. The pedal should now be free from its slot.
Step 5: Turn the Bicycle around 180 Degrees
Turn your bicycle 180 degrees so that it is facing you, this will allow you to have easy access to the other pedal. Make sure to have cleared sufficient space around your bike so there are no opportunities for it to topple over.
Step 6: Rotate the Crank Arm
Rotate the crank arm of the pedal clockwise. This is to loosen it further from the pedal. Do not remove it completely because you still need to get it off to get your bike back into shape.
Step 7: Position the Spanner Accordingly
Gently place your spanner into that small hole or over that part of your fork that helps hold your bicycle pedal in place. Using your hand, gently guide the spanner until you feel that you have the right position.
Step 8: Remove Sneaky Pedal
Very carefully rotate your crank arm in a positive direction. This is to lock the pedals into place so they will no longer be able to come off when you are riding your bicycle. This is what keeps your bike working properly, when you ride with loose pedals, it could cause damage to both the bike and the person riding it. This should be done very carefully because it would not be good to have to correct your mistake.
For Your Safety
Although taking off your bicycle pedals is not a hard thing to do at all, you still need to be very careful in doing so.
1/ Put on the Necessary Safety Gears
Wearing the proper safety gear is essential for this activity. Safety gears or equipment can be your helmet, protective gears like elbow pads, knee pads, etc.
2/ Avoid Doing This under the Influence of Alcohol
You need to be sober before you take off your bicycle pedals because if you are drunk or under the influence of any other substance that will affect the way your brain functions, then it is highly likely that you will do something wrong.
3/ Exercise Caution When Doing This
You must remember that when you are taking off your bicycle pedals, you are holding onto it by its pedals for support. You risk dropping your bicycle pedal if your wrist or fingers slip out of the grasp of the bike pedal.
4/ Be Careful not to Accidentally Kick Something with Your Feet While Removing the Bike Pedals
This is not good because you may get kicked or fall over which might damage your bike or have severe consequences to yourself. Always be more cautious so that you do not accidentally fall over while removing the bike pedal.
5/ Avoid Moving too Fast While Removing the Bike Pedals
Removing the bike pedals should be done very slowly and cautiously because there are risks involved when taking off-bike pedals without a pedal wrench especially when that bicycle pedal has been stuck for a long time, like months or even years. This will cause it to be more difficult for you to remove the bicycle pedal.
Why Do I Need to Take off Bike Pedals?
There are many reasons why people would need to take off bike pedals. The most common reason is when the bicycle pedals are loose. Some people prefer to ride their bicycles with very loose pedals because it makes the bicycle easier to park and move around. Some cyclists like to use their bicycle as an everyday commuter, but they want it very close for comfort for their daily commute.
Loose Bike Pedals
Some people simply like their pedals to be loose. This is because the bicycle will park and move around much easier, and it enables the rider to climb stairs and go up sharp hills with ease. It gives you more control and is more pleasant since your feet won’t be as weary after a long ride on a bicycle with loose pedals.
Bike Pedals That Are Too Tight
Sometimes the pedals on a bicycle are too tight and you need to remove them. This might be because you want to loosen them up or because they are completely stuck and you need to get them off. If the bicycle pedals are too tight, it might be hard to move them by hand, and if there is something stuck between the pedal and the fork alignment system, then you might need to remove the pedals so you could get it out and not damage anything.
Preventing Damage to Bicycle
If the pedals are stuck on the bicycle, it might be causing damage to your bicycle. If your bicycle is not in tip-top shape, then you might fix it so you can continue riding it for many more years. Sometimes people need to replace their bicycle pedals because they are too worn out or otherwise damaged.
Pedals That Are Too Worn Out
Sometimes people want to change their pedals because they are too worn out and they need replacements. If you wear out your pedals, they will be too loose and might fall off when you ride the bicycle, causing yourself much danger and problems. It is better to replace your pedals rather than to keep riding with old ones that might fall off.
Getting On and Off Bike
If the pedals are too tight, you might experience a lot of pain when trying to get on and off your bike. This is because it will cause wear and tear on your joints and muscles, especially if you ride a bike with daily commutes. If the bike pedals are too tight, then it may be time to get new ones and replace them before that happens to you.
Sometimes you might need to fix the bike. This could be because it is damaged or because you want to add more features like a custom bike or add more accessories to your bicycle. If the bike is damaged, then it needs to be fixed, and this might involve removing bike pedals, which can be very dangerous if not done carefully.
It is possible to change the bike itself. Sometimes people need to buy something they see online, like a different color or model of bicycle, this might mean they have to replace some parts of their bicycle. If your new bicycle has pedals that are too tight, you might have some issues getting your new bicycle onto your bicycle frame. If the bike pedal system wears out too fast, then it may be time to replace some parts of the bike yourself so that you can get back into cycling once more.
Removing bicycle pedals is not easy if you do not have the right tools. This is why it is best to invest in a pedal wrench in order to do this. It can be very useful when removing bike pedals, especially when they are too tight, and it is difficult to remove them with your hands alone. It can be very useful in many ways when you need to remove bike pedals. You should be very careful when taking off bicycle pedals, especially when they are stuck because there are quite some risks involved in doing so. If you follow these steps properly, then it is possible for you to do the job without any difficulty or risk of injury or damage to your bicycle or yourself.
1/ Where can I buy pedal wrench?
You can purchase pedal wrench online or at a local bike shop near you. You might want to check out some specialty bicycle shops or trust your local bike store for help with where you might find the best pedal wrench for you.
2/ How much do pedal wrench cost?
Pedal wrench can cost anywhere from $17.99 to a few hundred dollars. The more expensive the wrench, the higher the quality of it will be and it will last a little bit longer before you need to replace it. Most of the time you can find good quality pedal wrenches for under $20 though which is wonderful if you are on a budget and need to purchase a lot of tools.
3/ What types of pedals are there?
There are many types of pedals out there, each with its own purpose and features. Road bike pedals have a very thin profile, whereas mountain bike pedals have very large platforms that enable you to grip your bicycle easily.
5/ Can I use my hand instead of a pedal wrench?
You can definitely use your hand to take off your bicycle pedals, but it might take you a lot longer if you are not very careful. This is because it would be dangerous for your fingers to get caught in between the bicycle pedals teeth and teeth of the pedal wrench.
6/ How long does it take to remove bicycle pedals?
This all depends on how much experience you have with wheel removal tools and how fast you are at wheel removal. If it is your first time removing the pedals, you might be better off getting help from a professional cyclist or someone who has done it before.