One of the most noticeable features of logging boots is the high-heel design. But why do logger boots have high heels? We are going to find that out here, plus many more things about these shoes.
If you know your protective wear, you will know that logging boots are unique in design. After all, the lumber profession is flouted with many dangers, including falling logs, slipping, mud, knocking your toes on nasty stumps, and so on. However, the saving grace is that this footwear is designed to offer you maximum protection.
What are logger boots used for? They are used for farm work and timberwork, but especially for the latter.
To understand the design and the build quality of the logging footwear, you have to understand a few important things about working in this industry. You also have to understand the working conditions that you are going to experience here.
They range from wet and muddy to swampy sometimes. The good thing is that the sturdy footwear is made to help you traverse all types of terrains.
Table of Contents
- What Are Logger Boots?
- The Advantages Of Logger Boots Include Their High Heels.
- Types Of Logger Boots
What Are Logger Boots?
Logger boots are a form of hiking boots typically made from leather, carbon fiber, or nylon. They may have metal loops for climbing ropes and other gear at the front of the boots, known as “tripod technology.”
The first logger boots were designed in 1874 by Scottish engineer James Stitched. At the time, Stitched also designed steel-toe hiking boots for bridge-building. The logger boot was created to be lightweight and durable enough to use on rough terrain due to their heels being reinforced with steel shanks. The steel toe was removed from these new logger boots after they proved effective in stopping falls before they could cause damage or injury.
Logger boots are special work boots designed for ordinary workers and those working in the logging industry. However, due to their durable construction and various features, these boots are perfect for others engaged in other demanding professions.
Workers who spend most of their time on their feet can also acquire benefits from the logging boots. Furthermore, logging boots are also the safest for backcountry purposes if adequately worn and constructed.
Usually, logger boots have a square toe than narrow, along with a high heel of 8 to 10 inches. Similarly, most logger boots have a lace-to-toe pattern but not always. Logging boots also have tassels or a kiltie on the tongue to prevent debris and dirt.
The Advantages Of Logger Boots Include Their High Heels.
Heel helps with climbing
In the lumber industry, there is a lot of climbing involved. For example, when you want to guide a tree in which direction it should fall, you have to tie a line near the top to guide the tree. This requires a lineman to climb up and tie the line.
How does the high heel come in then? You may be wondering. When you have to climb up a pole or a tree trunk, you will need spurs. These spurs can be fixed tightly and in the right way, quickly. The gap provided by this design helps with that. Unfortunately, fixing climbing spurs on a flat-soled pair of shoes is quite hard, almost impossible.
Gives you proper elevation from the ground
The terrain around which the logging activity happens can be pretty predictable. Most of the time, the forests are marshy and therefore, you need a good pair of shoes that can keep your feet from the water.
That is the reason for the high-heeled design and thick soles. They increase the distance between you and the ground by an inch or so, keeping your feet dry all the time. Sometimes, you have to walk through the muddy and frosty ground. The high design of the boot keeps you dry, and it also keeps the frost out.
Since the terrains over which you will be doing this work are pretty uneven, the high-heeled design will give you a proper grip on the ground. Moreover, it will be hard to lose your grip because the rest of the sole also has heavy and rugged treads.
The soles are also made to outlast the rest of the shoes virtually. The manufacturers pay special attention to the soles because they do all the work. They are in constant contact with the ground, the rocks, the mud, the grass, the tree stumps, and the logs. With the kind of abuse that the soles get, they need to be hardy.
Heels help you to walk up a steep slope
You might not know it, but when you walk, the heel is the first part of the shoes to hit the ground. That is why you experience heel pain when you wear thin, flat-soled shoes for too long. On the other hand, the high-heeled design of timber boots makes them ample for walking up a steep slope.
A heeled boot will dig in well and keep you stable as you move up a slope. However, in most cases, you will be carrying gear like ropes, chains, and others, making it even harder to move up a slippery slope.
It does not matter whether the terrain is rocky or strewn with tree stumps because, with these boots, you will navigate your way very well. Moreover, they will give your feet the ultimate protection all the time from the ground and the weather.
Logger boots are more comfortable with high heels
Since the heel is not too high, logger boots are pretty comfortable. If you work on your feet all day, you know that the heel area of your foot can hurt badly. Therefore, when you use high-heeled boots, you feel more comfortable because they generally support the entire foot structure.
Also called caulk boots, they are roomy by design. Therefore, they are more accommodating to people, even with their enormous feet. This is why some people even wear them for hiking, even though they weigh more. However, when ordering yours, always make sure that you order the right size for your foot. You can refer to this article to see more about shoe width.
They are suitable for your health
Foot pain, especially in the ball of foot area, is a common affliction faced by people working in the logging industry. This is one of the reasons why they need special footwear that has been designed to prevent that. With the elevated heel area, the ball of the foot does not have to bear the brunt of the heavy work. This means that there is no undue weight exerted on the ball of the foot region.
If you have a high arch, you can buy custom inserts and use them in your boots. However, high-heeled boots can help a person with high arches more than flat-soled shoes would. Therefore, you might even find that you do not need inserts.
Another way that these boots help with health is because they enable the wearer to keep their back straight. The torso is well supported, something that comes naturally because of the elevated heel. For the same reason, women wear high-heeled shoes because they help them keep a straight posture when.
Another thing that you need to worry about when you spend your days on your feet is shin splints. This condition causes severe pain inside the ankles. You only feel this pain when you stand or move. It is caused by wearing the wrong shoes. Therefore, the boots can help you mitigate such a problem quickly.
You can brace against things better
In the timber industry, you will use all limbs to move branches and logs out of the way. Therefore, you will love the raised heel for helping you brace against tree stumps when you are pulling something.
The heel can dig in properly and give you ample support to brace your feet against something. Again, this would be hard to do with flat-soled shoes.
Why do logger boots have high heels? After reading this article, you have seen several reasons, which mainly revolve around your health, safety, and comfort. Wearing the right pair of protective footwear can make all the difference between being productive or failing to meet your targets at work.
It can also enhance your foot and back health. You are advised to wear boots made explicitly for timberwork if you want to stay safe and healthy. You will notice that they are different from other types of work boots because of the kind of work you are supposed to do in them.
Types Of Logger Boots
For the most part, logger boots are an alternative to work or safety boots. They are used in forestry or when working around heavy machinery. They provide good grip and defense against either chemical in the workplace or falling objects with their rigid, rubberized crushing plates on the sole.
Many logger boots come with six-inch round steel toes that extend up to protect your entire foot from injury in this heavier-duty industry where there is always a risk of falling objects. The tops are usually made of leather for better breathability. They have two types of waterproofing – Everguard leather for better outdoors use and waterproofing spray if you want them inside an office or building.
Firefighter logger boots
Some logger boots come with steel plates and metal connectors that cross the boot to offer better protection from falling objects. However, these types of logger boots are more expensive.
The soles of logger boots are usually four or 5-inch baseball-type crepe rubber or fire-resistant rubber. They also come with a very thick heel for extra support and balance and a heavy counter for extra strength. Unfortunately, they’re not made to be light, and they’re not built for speed! If you need to run through fire, then you’ll probably need a pair of firefighting logger boots that will hold up in extreme conditions and carry you safely through the inferno.
Lineman boots are also known as Lineman’s work boots or electrician boots. They are logger-style steel toe boots with an additional electrically insulated sole. They are made of rubber or leather and are usually used by utility linemen. They can also be used by technical mountaineers for their grip on ice, but not necessarily for warmth, given their thin insulation.
They come with a unique Vibram-like sole that is made of tool steel. It has an open lacing system so water can flow out and has a composite midsole for additional strength. They also feature electrical shock-resistant soles, which could be helpful if you’re dealing with electricity regularly.
To learn more about electrical safety, please check this Basic Electrical Safety.
Steel toe logger boots
Steel-toe logger boots come with a steel shank that runs from the heel to the toes. They are made of full-grain leather and a rubber sole. This gives a lot of stability and makes them perfect for slippery conditions and protection from large objects. They are necessary for those who do a lot of rough work or those who work in freezing temperatures or situations where the ground is wet and slippery, such as loggers.
The toes have a Vibram-like sole, just like in Lineman’s boots, but they’re a little more flexible and much less bulky. The steel shank holds up to heavy loads and can be bent in a way that works with the toes to give you more protection from machines or other objects.
The steel shank has been used for many years in logger boots by many different companies. But others are using them as well, so it is hard to choose one brand when they can all perform similarly.
For those who work outside in cold climates or love hiking in damp climates where shoes are not going to cut it, you should look into logger boots that will provide warmth and protection for your feet.
These boots, also known as caulk boots, can be used in construction or for harvesters and other people who work in wet weather. But it’s different from the construction work boots. These work boots fit for construction can prevent hurting your feet from the falling heavy objects.
Caulked logger boots usually come with a chain-mesh molded outsole and a rubber toe. They’re usually waterproof and feature non-slip treads.
These are perfect if you need to get up close and personal with large machines or everyday objects that might cause impalement through your boot. One of the essential features of these logger boots is the molded outsole, which provides more excellent support than regular rugged rubber soles.
Why is there a heel on logging boots?
Why is that? Primarily for additional ankle support, especially when negotiating uneven or mixed terrain, and definitely when going uphill. The raised heel also gives additional arch support, which is needed when doing heavy outdoor work as the arch functions more or less as the foot’s shock absorber.
How much height do logger boots add?
Also, the high heels give you additional arch support as it absorbs shock so your feet won’t feel any discomfort while walking or climbing through challenging terrain. A logger boot adds up to 1.25″- 2″ to a regular boot. Here is a quick overview of different logger boots and how much height does it add.
What is the point of logger boots?
Logger boots are used to work through the brush, muck, and other undergrowth types and aid in any climbing needed. Logger boots are designed to be worn by workers in the logger industry, hence the name.