Rolex is a famous watch brand and is loved by many customers. However, after a period of use, you may encounter common problems such as it does not tick. Don’t worry, and there will be suitable solutions for such cases.
Rolex is synonymous with luxury watches. They are known for their sleek designs, lengthy warranties, and sturdy build quality. Rolex watches are the epitome of the word “luxury” in watchmaking. Why, then, do Rolex watches not tick?
The answer can be found in one word: prestige. To listen to ticking on a Rolex watch would be to degrade its prestige and classiness. A sound so common would take away from what people love about Rolexes most – their silence.
Causes Of Mechanical Watches That Make Rolex Watches Not Tick
Cause 1: It Has Not Been Used For A Long Time
It is easy to understand, Rolex watches don’t tick due to running out of energy. The reason is that the watch has not been used for a long time, and the watch’s energy is also depleted over time. A regular mechanical watch has a power reserve of 38h – 40h, and if your watch has a Powermatic movement, the reserve will have twice the time. So when the power reserve time is exceeded as above, the mechanical watch will not run anymore.
How to handle:
We will have 3 cases as follows:
- Handwinding: You should be careful not to pull the crown out. You leave it and then turn the knob in the direction of the wheel forward 10-15 times.
- Automatic self-winding watch: The watch self-winds based on the movement of the wrist. So to make the watch work again, you shake it gently to the sides about ten times, then the watch will usually work.
- There will be cases when the watch is left for too long, leading to dry oil, and the watch cannot run; we need to wipe the maintenance oil again. The parts are cleaned and lubricated to be able to work perfectly again.
If you’re a fan of walking or standing for long hours, check out these tips to make standing all-day easier on Hood MWR website. These helpful tips range from investing in a standing mat to ensuring proper posture, which can make a significant difference in reducing discomfort.
Cause 2: You Forgot To Close The Crown
Maybe you forgot to close the crown when winding, causing the mechanical watch to not run for a while. Most mechanical watches have a “stop hand” function when the crown is pulled out to set the time. Then in the process of using the knob can get stuck somewhere, or you forget to close the knob, leading to the mechanical watch stop running.
How to handle:
Close the watch crown. You need to push the knob inward with your hand, and the watch will usually work.
Cause 3: Damage Occurred Inside The Watch
Due to the reasons that the watch factory is faulty, you can use it for some time when the mechanical watch does not run anymore. Or due to external influences that cause the watch to be damaged inside, such as broken mainspring, broken gears. And the most common cause of mechanical watch wearers is that the watch is broken due to a strong impact; magnetic contamination; you screw the winding crown incorrectly.
If your Rolex watch is not ticking, it could be that damage has occurred inside the watch. In such cases, it is better to get your watch repaired by a professional Rolex watchmaker. Take a look at our article on why Fossil watches are expensive to understand why it’s important to invest in a quality product for better longevity and durability.
How to handle:
In the above case, you should bring the watch to the most reputable watch repair place to be checked and diagnose the most accurate condition.
Some Other Reasons That Make A Rolex Watch Not Stick
A Mainspring Is Not Working
A mechanical watch is a type of watch that runs on the principle of winding. Therefore, the mechanical watch will stand when the mainspring does not work, and the needle system will not run anymore. The cause of this is that when you are not using the watch, the mainspring will come apart, or the gears of the mainspring will separate.
There was no force transmitted to the gears, so it did not wind the watch. So it cannot continue to run.
If you are experiencing problems with your watch’s mainspring, consider checking out our guide on different types of watches. Whether you’re into mechanical, automatic, or quartz movements, understanding the inner workings of your timepiece can help you diagnose and fix any issues that may arise.
Number Stakes Fell Off
Another cause is that the number rod has fallen and got caught in the needle. Machines that are dry or damaged inside are also the cause of the clock standing.
Due To Temperature
The best temperature for mechanical watches to operate is from 5 degrees Celsius to 40 degrees Celsius. Exceeding the temperature or sudden temperature changes also makes the watch run inaccurately.
Rolex watches are known for their precision timekeeping, which is achieved by their intricate mechanical movements. However, these movements can be affected by temperature changes. To ensure your Rolex continues to function correctly, consider storing it in a safe, temperature-controlled environment. You can learn about temperature conversions for cooking with the oven temperature conversion calculator.
Dry Oil In The Machine
When the lubricating oil layer in the machine is dry, it will cause the watch to slow down or stop working, leading to a standing mechanical watch. Therefore, when using, you should give the watch a warranty to clean the oil every three years.
How To Fix
The best way is to take the watch to a reputable repair facility. The watch experts will disassemble the movement, check the hairspring and components for you. If the wire is skewed or jammed, adjust it again. If the mainspring is broken, you should replace the watch with a new one.
Hopefully, with some of this knowledge, you have a better understanding of the common mistakes when using mechanical watches. If your beloved counter has one of these problems, you can take it to a Rolex service center. Low cost along with quality is what you will get. Whether your watch is old or new, your problems will be dealt with quickly and efficiently.
When your favorite boots get cracked, it’s important to know how to repair them to keep them from deteriorating. Follow these 5 easy steps to fix your cracked leather boots and have them looking good as new.
The Working Mechanism Of Rolex Watches
The structure of a simple mechanical watch consists of the following six main parts: the power generator; Gear, escapement set; control, and time display. These parts will come together and help the watch work in the following main steps:
- Step 1: The watch is powered by winding when your watch is Handwinding or Flywheel if your watch is Automatic.
- Step 2: Power is transferred to the gear system.
- Step 3: Because the energy transferred to the gear system is quite significant and uneven. So the reducer and the control part will have the function of making the gear run at a certain speed.
- Step 4: The watch’s hour and minute hands are hooked up to gears and run at a controlled standard speed that keeps the watch running as accurately as possible.
Overview of Rolex Company
Rolex boasts over one hundred years of in-house manufacturing experience. They have created watches in various different styles, with variations on each style in terms of size and dial color. They have also made solid gold watches that are very popular with women and men alike. Historically, they made pocket watches that were mounted in leather cases to protect them from the elements – this is where their name comes from. A lookout posted high on a ship would say “Rolex” when he spotted another ship so the captain would not crash into it by accident. By the end of the 19th century, Rolex had become an internationally recognized brand name.
- Founded: 1908
- Founder: Hans Wilsdorf
- Area Served: Europe, Russia, Africa, South America, and Asia
- Parent: Hans Wilsdorf foundation
- Headquarters: Geneva, Switzerland
- Number of Employees: Approximately 3,000
- Number of Products: 8,000
- Main Products: Watches. Jewelry and accessories are also offered throughout the collection.
Rolex never started manufacturing watches that ticked, because they valued the prestige of their product over its monetary value. Rolex also did not want to compete with other watchmakers who did produce ticking watches by taking away the market share from them – their customer base would have become smaller and there would have been less profitable. This would have been detrimental to the brand.
They put a lot of money and effort into making their product as good as it can be. Only those who value only reliability and strength would not buy their products – those who want to own a luxury watch without having to worry about it breaking will see that the quality and attention to detail are evident in all of their models.