Watch Band sizes are one of the factors you will need to pay attention to when choosing to buy a watch. Because wrist size is different for everyone, most watch brands do not have a different size for your wrists. So when you buy a watch, you have to adjust or cut it yourself most of the time. But some ways can help you choose a better watch band size.
What Kind Of Factors Affect Watch Band Sizes
To choose the correct watch size, we first need to list the factors that affect the size that each watch represents. The length of the watchband and the diameter of the watch face determine the sizes of your watch.
Therefore, it is necessary to determine the size of these parts to suit each other and with the wearer’s wrist, choosing a suitable watch for men is not a complex problem.
How To Determine The Length Of The Band
The length of the watchband is determined based on the size of the wrist, in which there are two lengths that we need to keep in mind: the short band size and the extended band size.
The long rope is the wire with holes, and the short wire is the cord with the buckle. Therefore, the length of the rope will be written as follows 125/75, where 125mm is the size of the long band, and 75mm is the size of the short band.
To measure your wrist, you need a measuring tape or a piece of string to wrap around the wrist. Record the measured dimensions with the rope, stretched out straight and using a tape measure.
A few wire sizes for wrist circumference that can be used for reference:
– Wrist 6.0 – 6.5 inches (150 – 164mm) = 120 / 70mm.
– Wrist 6.6 – 7.0 inches (165 – 178mm) = 125 / 75mm.
– Wrist 7.1 – 7.5 inches (179 – 190mm) = 130 / 80mm.
– Wrist 7.6 – 8.0 inches (191 – 203mm) = 135/80mm.
– Wrist 8.1 – 8.5 inches (204 – 216mm) = 140 / 85mm.
How To Determine The Width Of The Band
A slim watch band will make the watch look smaller instead of a wide band. The width of the watchband between two sides of the watch’s pin where the strap is attached to measure it.
You can use a caliper or a regular ruler to measure in this case. The width of the band is denoted as 24/22 (24mm is the width of the watch pin, 22mm is the width of the watch buckle).
The bandwidth to fit the watch glass is usually ½ of the size of the glass: the width of the men’s classic watch band usually falls in the range of 18mm-24mm (the corresponding face diameter is 36 – 48mm.
Meanwhile, women’s standard watch bands usually have a width of 12 – 18 mm (diameter of the corresponding face 23 – 36 mm).
If you need to determine the width of your watch band, check out this Belt Size Conversion Chart. With sizes for both men and women, in both US and EU measurements, this chart can help you find the right size for your watch band. After all, both belts and watch bands are worn around the wrist, so it makes sense to use the same sizing chart!
How To Determine Watch Face Diameter
The watch face diameter sizes are determined to suit the wrist type according to the following standards:
– Small female wrist: 23 – 25 mm.
– Average female wrist: 26 – 29 mm.
– Midsize: 34 – 36 mm.
– Small male wrist: 37 – 39 mm.
– Medium male wrist: 40 – 42 mm.
– Large men’s wrist: over 42mm.
There is Midsize size: has a relative size for both men and women (for women, this size is for large wrists, and for men, it is suitable for small wrists).
How To Measure The Correct Watch Size For Your Wrist?
To choose a watch that fits your wrist, you need to know your hand and watch face sizes. The ratio between face and wrist circumference is 4.0 – 5.0. So, divide your waist circumference by 4 or 5, you will get the watch face that best fits your hand.
Unique formula for you to choose your watch size:
– Wrist circumference/4.5 = optimal watch face size.
– Wrist circumference/4 = maximum watch face size.
– Wrist circumference/5 = minimum watch face size.
To ensure your watch fits comfortably and accurately on your wrist, it’s crucial to measure the correct watch size. Consider checking out the average hand size charts for men, women, and juniors to help determine the appropriate watch band sizes. This additional step will help you achieve the perfect fit for your watch and enhance your fashion statement at the same time.
Instructions For Three Ways To Measure Watch Band Size
Method 1: Determine The Size Of The Watchband With A Ruler
This way of measuring watch band size is straightforward for you to do. You need to prepare a tape measure, ruler, or electronic ruler to manipulate it. You measure as follows:
- Step 1: Need to determine the measurement location, the position to be measured is the part of the watch that is in direct contact with the watch wire.
- Step 2: Take a ruler and measure the distance of the wire at the point of contact with the watch. How many millimeters (mm), the size unit of the watch band is mm.
- Step 3: Measure the width of the watchband adjacent to the keychain to determine the size. Usually, the keychain will be 2mm smaller than the part that comes in contact with the watch.
- Step 4: Next, you also need to measure the thickness of the band if you find the old watch band is not suitable or too thin or thick for the watch and needs to be replaced.
- Step 5: If you are a person with a unique wrist size (wrist is too big or too small), you should measure the length of the old band or measure the length of your hand.
In addition, to be more sure, you can also measure the size of the keychain, also known as the keychain size, because sometimes it is also different from each other. Usually, the buckle size is 2mm smaller than the strap. The standard wire sizes – buckle sizes are 22mm – 20mm, 20mm – 18mm, 18mm – 16mm. However, there are also exceptions.
In this way of measuring the size of this watch band, you take the unit as millimeters. Dimensions in mm need to be precise. If you go directly to the store, it’s okay, because there will be a staff to advise and measure for you. But in case you order online, the measurements need to be standard to ensure the goods arrive as expected.
Method 2: Determine The Size Of The Watch Band Based On Your Old Watch
Another way to measure watch band size is to use your old watch band. This case can only be used when you have a watch that needs to be replaced with a new strap, but not in cases where you need to know what size is right for your hand.
If you have a genuine old watch band, you should flip the old band’s back to read the readings. Usually, brands have the included size in mm under the back of the cord. The next task is to try on this band to see if it fits or not. If it’s oversize, you can figure out whether to increase or decrease the size of the leather band.
How to measure this watch band size is also very simple. You can do it at home, and anyone can do it. A small note for you is that if the old watch band does not show the size, your task is to re-measure the band’s size, thereby knowing which size to choose accordingly. You use rulers as the first way to do this.
Method 3: Determine The Diameter Of The Watch (Also Known As The Watch Face)
When don’t you have a ruler – no old strap, how to determine the size of the watch band? A simple way is to find out how to determine the band size by “Search Google” what is the diameter of the watch you are wearing. Then you compare the corresponding parameters with the article below.
The dimensions of the dial diameters are determined for the leather strap according to the following standards:
- Watch diameter: 26 mm; the corresponding wire is 8mm
- Watch diameter: 28 mm; the corresponding wire is 10mm
- Watch diameter: 32 mm; the corresponding wire is 12mm
- Watch diameter: 34 mm; the corresponding wire is 14mm
Some Notes When Choosing A Watch Size
Once you know how to measure the watch band size, you will find yourself a watch band that best fits. Before choosing, you should note the points we suggest below.
Ensure that your watch fits comfortably on your wrist. The Reasons why people wear watches upside down may explain the trend but the right fit is still essential. Avoid watches that slide too easily and those that require you to fasten the watch too tightly on your wrist.
The Clasp Is The Point You Need To Pay Special Attention To
If you own a regular clasp, then congratulations; there’s not much to worry about. Because ordinary pegs are very easy to find on the market, you have almost no trouble choosing the right type of band.
If, unfortunately, you’re using a more special latched cord, be careful. Because if you accidentally throw away the clasp, there is a high chance that you will have to go to the manufacturer to replace the component. So check before you throw it away.
What Is The Watchband Made Of?
It is also the next issue you need to consider carefully. Many people have different interests. Currently, there are two popular types of watch bands: metal and leather. Each person will choose for themselves a different type of band. The strength of the leather band is that it is beautiful, light, and does not cause much redness on the skin. The metal band has the advantage of being solid and elegant, and rugged.
The material of the watch band will affect its appearance. So, if you have small wrists, we recommend choosing small bands because it does not create a heavy feeling in your hand.
Consider The Color Of A Watch Band
Color is also a factor when you choose a watch band. The color should match the primary color of the watch and the skin tone of the owner. Choosing the right color will increase confidence and not cause discomfort to the opposite person. Whether you are a person who knows how to combine accessories and is a fashionista depends on how you choose the color of the watchband and the outfit.
The above article has provided a lot of detailed information so that you can choose the correct watch strap for you, right? If you have any questions, do not hesitate to ask us questions and also do not forget to follow our latest articles coming on the website. I hope you have a good day.