Pull-on work boots are one of the most popular types of footwear for utility workers. These types of boots are designed to allow for easy on-and-off access while providing protection to the wearer. Pull-on boots are generally designed with sturdy rubber soles that provide the wearer with an edge in any job that calls for their services. The one thing pull-on have in common is that they are not intended to be worn when you are not wearing them.
Pull-On work boots need to be the perfect fit. They should offer no restriction and not move while you work or while your feet swell while on the job site. When the boots are too tight, they can impede your foot movement and cause blisters on barefoot work sites.
Pull-On Work Boots need to fit comfortably. This post provides content about how should pull-on work boots fit.
Table of Contents
- 9 Tips for Pull-On Work Boots Fit
- Should Pull-On Boots Fit Loose?
- Why Do Pull-on Work Boots Fit?
- How Bad Will It Be If Pull-On Work Boots Do Not Fit?
9 Tips for Pull-On Work Boots Fit
If you are serious about your Pull-On work boots, you should be serious about the fit. Before you buy pull-on work boots, there are some things you need to know about the fit. Below tips will assist you in finding the ideal fit for your Pull-On work boots:
Tips 1. Know your shoe size
The first step in getting a good fit for your pull-on work boots is knowing your exact shoe size. Pull-on work boots with a traditional lacing system allow you to adjust the boot’s fit by tightening or loosening the laces so they can be a perfect fit. If you buy a pair of pull-on work boots that are too large, they will fall off and be uncomfortable. On the other hand, they will cut off circulation to the toes and prevent swelling if they are too small.
Tips 2. Identify your arch
The second tip in getting a good fit for your slip-on work boots is identifying your arch. You can measure the arch of your foot to find the exact measurement for your pull-on work boot. If your foot is not shaped like typical shoes, you should pat an extra layer of felt on both boot bottoms to provide more support for that part of the foot. This will keep that part of the foot from rubbing or chafing inside your work boots.
Tips 3. Correct posture
Getting a good fit for your pull-on work boots is to ensure they are laced the right way. Proper posture will help reduce fatigue, improve your balance and even force you to avoid painful repetitive motion injuries. Pull-On work boots should be laced horizontally rather than vertically. This will keep lace pressure on the widest part of the foot. If laces are vertical instead of horizontal, it can cut off circulation or cause blisters for sensitive feet.
Tips 4. Laces
The next tip in getting a good fit for your pull-on work boots is to use flat laces or twill laces. Flat laces are the best choice because they allow for maximum comfort and flexibility. Twill laces can cut off circulation and cause blisters if they are too tight. Check the pull-on work boots you purchased to make sure they have flat laces or twill laces. If not, buy new ones.
Tips 5. Store Boots
The sixth step in getting the best fit for your pull-on work boots is knowing how to store them. Do not store your pull-on work boots while they are laced up. If they are laced, it can force the crease of the boot to form in an odd way that causes them to wear out at a faster rate. The only exception is if you have a separate pair you wear while not working and another you will use while working. They should be stored without being laced while not in use.
Tips 6. The break-in process
Every pair of Pull-On work boots will have a different break-in period, some shorter than others. The best way to tell whether your pull-on work boots need to be broken in is by how it feels when you put them on after wearing them for a few hours or a few days. The fit should be snug when you wear them for the first time. If they are too loose or too tight, it could hurt your feet or cause your feet to bloat when you wear them again.
Tips 7. Don’t wear over heavy socks
Getting fit for your pull-on work boots is learning how to wear them with a sock. Pull-On work boots should be worn without socks so they will not rub against the sensitive parts of your foot. If you wear socks, you should wear thin ones, not add extra pressure to your foot.
Tips 8. Break-in period
Note about how long it takes them to break in. Not all Pull-On work boots are created equally some take less time than others, while some can take more than a week for them to be soft and comfortable. If you experience a constant painful throbbing sensation on the bottom of your foot after your work boots have been broken in, then they are too tight. If they feel too loose or just do not fit snugly at all, then it is time to try new boots.
Tips 9. Informed choice
Make certain you’re purchasing a suitable pair of shoes. All of the information that you gathered will come to use. Make sure you obtain the proper size for your fleet, the right sort of sole, and the optimum quantity of foot support. The wrong size, wrong type, or inadequate support can cause injuries or poor performance while working.
Should Pull-On Boots Fit Loose?
If you wonder if your pull-on boots should fit loosely or snugly, you should think about how they will be used. If you will be doing any work that requires you to constantly be on the move, then snug-fitting boots would be best. This is because moving around freely while working is important, so having a fully functional and comfortable pair of boots while moving is essential. You want to make sure that they fit snugly around your feet, and they should not be too loose or too tight.
If you are looking for the best pull-on boots that offer maximum comfort and flexibility, then it would be best to buy a pair designed with arch support and a contoured sole. A contoured sole will offer excellent cushioning, and you will feel very comfortable even if your feet are slightly sweaty. In addition, with arch support, you will feel much more confident when standing or walking around while wearing them.
Think about what you will be using them for, and look for a pair that fits snugly but is not too tight. They should let you move about freely and should not create blisters or soreness in your feet.
You should also consider making sure that they are very comfortable, especially if you will be wearing them above 40 degrees Fahrenheit. If you plan to stand in one spot all day when working, you probably want something more breathable and flexible around your feet when working.
You should also consider the weather you will be working in when buying your pull-on boots. If it’s chilly outside, you’ll want to invest in footwear that keeps your feet dry and toasty even while they’re wet. On the other hand, if it is hot, you will want something that allows for maximum ventilation if your feet become sweaty.
Why Do Pull-on Work Boots Fit?
Pull-on work boots should fit because:
- They will not fall off of your feet while you walk around in them.
- They will be more comfortable when walking over uneven surfaces, overhanging branches, etc.
- They will last longer.
- You will not cut your feet on sharp objects or nails.
- They will provide cushioning for your feet.
- They will protect your feet, especially under the soles of the boot.
- They will prevent blisters and calluses on your feet, which can be very painful if you work with them daily.
- They will allow your feet to breathe.
- They will provide better traction for your feet in the mud or wet, slippery conditions.
- They will not restrict blood flow to your feet, which can cause them to overheat and swell up when regularly working in hot weather with hot work boots on their feet.
- Wear them properly, and they can even protect you from bites by insects or rodents, get down on all four.
- They will provide your feet with better balance.
- They will provide you with more stability when walking over uneven surfaces, overhanging branches, etc.
- They won’t stink up so bad after a short time of working in them because your feet won’t sweat so much through them.
- They will provide you with good traction in mud, wet grass, snow, etc.
How Bad Will It Be If Pull-On Work Boots Do Not Fit?
If your pull-on work boots do not fit, it will be making some bad things:
- They will be completely useless, totally worthless
- You will be uncomfortable, hurt your feet or show pain if you walk around
- The worst thing is that you might cut your feet on objects very easily. If this happens, it will leave scars on your feet.
- If you wear bad-fitting footwear, then the bones in your feet will not be protected.
- The boots’ soles will be worn out faster, so you need to replace them faster.
- They will not provide good traction for your feet in the mud, snow, ice, or other conditions.
- If they are so tight that your feet cannot move inside them, your feet will hurt under them every time you wear them.
- They will not protect you from bites by insects or rodents.
- You will be more likely to injure yourself with the tools you use daily because the boots don’t provide enough protection for your feet.
- They will not keep your feet warm enough, and you will be unable to work as long as you would with a pair of boots that fit.
- They can be extremely dangerous if they do not provide the right amount of protection for your feet.
- If they are too loose for you, they might slip off of your feet while working. This could cause several accidents depending on where you are working at the time.
Why do I need to buy Pull-on work boots if they fit?
You need to buy pull-on work boots because they will protect your feet, provide them with better balance and more stability. They will also help you walk over uneven surfaces, overhanging branches, etc. In addition, they will keep your feet warm, dry out quickly if they get wet, and are easy to put on and remove. After buying some, you can use them for many years.
Do pull-on work boots have to fit the same as regular work boots?
Yes, they have to fit the same as regular work boots because they provide the same amount of protection for your feet.
Do I need to buy custom-fitted Pull-on work boots?
You do not need to buy custom-fitted pull-on work boots if you do not want them to fit too tight or too loose. They will do you no good if they do not fit. Just buy them and try them on and see what you think of how easy it is to put them on and take them off.
How do I know if my Pull-on work boots fit properly?
If they are easy to put on and take off, they are probably the right size. You can also try wearing them for a few minutes or an hour or so and see what you think. If you feel like your feet are confined and cannot move, they probably do not fit properly.
How can I buy Pull-on work boots that fit me?
You can buy them from any store that sells such footwear. Just remember to try them on and see how easy it is to put them on and take them off. If they feel like they are too tight, then they probably do not fit you properly. Instead, try buying a size larger than what you normally wear.